Search found 6 matches
- Mon Dec 05, 2016 10:29 am
- Forum: FlashPro Manager
- Topic: Throttle body swaps
- Replies: 40
- Views: 63264
Re: Throttle body swaps
Hey guys, just wanted to follow up. So I reached out to skunk2. Turns out their throttle body comes without any of the internals. You'd have to unassemble the OEM throttle body and install these on theirs which according to them is a very straight forward process. So even though it's a larger thrott...
- Tue Nov 29, 2016 6:47 am
- Forum: FlashPro Manager
- Topic: Throttle body swaps
- Replies: 40
- Views: 63264
Re: Throttle body swaps
No, the throttle controller is either in the ECU (most ECUs) or a separate box (S2000 & TSX). The larger stock throttle bodies have a more powerful motor which draws more current (ZDX = almost twice as much). This current over load will shut down the ICs in the throttle controller under high lo...
- Mon Nov 28, 2016 11:23 am
- Forum: FlashPro Manager
- Topic: Throttle body swaps
- Replies: 40
- Views: 63264
Re: Throttle body swaps
It depends on what motor the skunk2 throttle body uses. If it is the same as stock, then there may be no difference. But then Honda uses a more powerful motor as the size goes up. You'd have to test it. With throttle body size it does not make any difference up to a certain air flow. Stock 62mm is ...
- Sun Nov 27, 2016 4:07 am
- Forum: FlashPro Manager
- Topic: Throttle body swaps
- Replies: 40
- Views: 63264
Re: Throttle body swaps
Then is it likely that the numbers and tests ran on this thread are a bunch of smoke? Why would we fake these tests? They were performed so that people could know why their large throttle body would not respond to an under sized controller. If you doubt us, then provide your own test results, rathe...
- Fri Nov 25, 2016 7:01 pm
- Forum: FlashPro Manager
- Topic: Throttle body swaps
- Replies: 40
- Views: 63264
Re: Throttle body swaps
The '06+ S2000 already has a larger diameter throttle body than the '00-'05, which is about the same diameter as the older TB's after having them re-bored to their largest possible diameter. Also, the OEM actuator is strong enough to drive 4 60mm ITB's over 20K+ daily-driven miles without any failu...
- Tue Nov 15, 2016 5:58 pm
- Forum: FlashPro Manager
- Topic: Throttle body swaps
- Replies: 40
- Views: 63264
Re: Throttle body swaps
The measurements for the TB will be the same regardless of the controller. If you want to open up the S2000 controller and read the IC part number for the output then you can find the current limit for the S2000 controller. But, it is moot as the TB motors are different unless the S2000 controller ...