Search found 7 matches
- Fri May 24, 2019 11:09 am
- Forum: S300 Calibrations
- Topic: Build B16A Turbo
- Replies: 2
- Views: 2735
Build B16A Turbo
whats up guy i need an basemap to drive my car to the dyno. my built is: -JDM B16A CSS block -JDM B16 head -Supertecht valve train (flat valve) -Skunk2 pro1 cams -Edelbrock intake with 72mm throttlebody -RC1200cc injector -aeromotive regulator -golden eagle fuelrail -Ktuned 4 bar map sensor -Hondata...
- Tue May 08, 2018 10:30 am
- Forum: S300 Calibrations
- Topic: Basemap Needed Build B16A
- Replies: 0
- Views: 1764
Basemap Needed Build B16A
JDM B16A Block & Head Mods: -CSS Block -Arias 10.5:1 81.5mm pistons -Skunk2 Rods -Type-R pump -Skunk2 Valvetrain -Skunk2 LMA -Skunk2 Pro 1 camshafts & Gear -Hondata CPR -Hondata s300v2 (BBG) -Edelbrock VictorX -72mm Throttle body -Speedfactory 3bar map -RC 330cc injectors -Walbro 450LPH inta...
- Thu Dec 01, 2016 11:38 am
- Forum: S300 Calibrations
- Topic: Full build B16A calibration needed
- Replies: 0
- Views: 1357
Full build B16A calibration needed
Hi guys i going to need a calibration for my full build B16a. -B16A block stock sleeve solid deck (CSS) -stock crank -Skunk2 Rods -Arias 81.5mm pistons 10,5:1CR -ARP studs -Full skunk2 valvetrain std size -Skunk2 tuner stage 2 camshaft (not degreed yet) -Edelbrock intake + 70mm TB -Speedfactory map ...
- Thu Nov 03, 2016 1:43 pm
- Forum: S300 Calibrations
- Topic: B16A2 semi allmotor build map needed
- Replies: 6
- Views: 3325
Re: B16A2 semi allmotor build map needed
thanks, the car is running great now..
- Sat Oct 29, 2016 4:05 pm
- Forum: S300 Calibrations
- Topic: B16A2 semi allmotor build map needed
- Replies: 6
- Views: 3325
Re: B16A2 semi allmotor build map needed
No i dont have a wideband yet.
And the old owner had the dizzy full advanced.
But tomorow i'm going to the dyno.
And the old owner had the dizzy full advanced.
But tomorow i'm going to the dyno.
- Fri Oct 28, 2016 12:30 pm
- Forum: S300 Calibrations
- Topic: B16A2 semi allmotor build map needed
- Replies: 6
- Views: 3325
Re: B16A2 semi allmotor build map needed
i install your map, the start up is good. only feel like misfire at idle, maybe because i didn't degree the cams yet.
tomorow i'm goining to let the cams be degreed, will try it again.
tomorow i'm goining to let the cams be degreed, will try it again.
- Thu Oct 20, 2016 1:47 pm
- Forum: S300 Calibrations
- Topic: B16A2 semi allmotor build map needed
- Replies: 6
- Views: 3325
B16A2 semi allmotor build map needed
B16a 2nd gen Engine: -Skunk2 camshaft tuner stage 2 -skunk2 camgear -skunk2 pro intake manifold -skunk2 titanium retainers -skunk2 valve spring -CTR Piston w/ new rings -ACL main&rod bearings -ARP head stud&rod bolts -blueprinted block -OBX throttle body -ITR airbox with air duct to bumper, ...