Search found 8 matches

by royalblind
Sat Mar 02, 2019 4:02 pm
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

Re: injectors not firing under load

crluver123 you got it man, took the TB off and sat there with "s300 manager" sensors tab open and adjusted the TPS until it showed 0% (with TB closed and) 106% at WOT. If I would have to guess, since i increased to a 70mm TB, the overall circumference of the plate is larger. Since it has to travel ...
by royalblind
Fri Mar 01, 2019 8:21 pm
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

Re: injectors not firing under load

2-24-19.2.s3d
(859.14 KiB) Downloaded 16 times
by royalblind
Fri Mar 01, 2019 8:20 pm
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

Re: injectors not firing under load

I may have inadvertently found the issue when you mentioned the TPS.I turned the key to the 2nd position and tested the TPS while watching the gauges (s300 mobile) and saw that even with 1/4 throttle open it dint register. at WOT it only registers 60%. Would this cause this type of issues? I haven't...
by royalblind
Fri Mar 01, 2019 4:53 pm
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

Re: injectors not firing under load

This is a snip of the s300 graph as the "loop" is occurring. I knew it was going to happen so i only let it go once or twice because I knew it would not stop, before stopping the engine. MAP is still registering but bellow the normal -17 (+/- 1) that it would idle at. I dont have a log of trying to ...
by royalblind
Fri Mar 01, 2019 4:20 pm
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

Re: injectors not firing under load

Not switched, tripled checked and they in the correct places. Map sensor on top of the TB has the disconnect purge solenoid(?) plug. I remove it and the MAP from the firewall when I swapped to the new intake. Never used the purge solenoid for the last 10 years, tank vapors are routed back to the tan...
by royalblind
Fri Mar 01, 2019 12:32 pm
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

Re: injectors not firing under load

Had no idea they are interchangeable. Will be checking shortly.
by royalblind
Fri Mar 01, 2019 10:18 am
Forum: s300 / SManager
Topic: injectors not firing under load
Replies: 9
Views: 828

injectors not firing under load

- 1990 CRX, D16a6 (built block and head, stock cam, non-vtec) - Skunk 2 Pro Series Intake and Throttle Body (IACV, IAT, TPS and MAP mounted to intake in stock location, PCV valve still in place) - Stock IPT 240cc injectors - Currently running p28 basemap with vtec disabled (along with some other op...
by royalblind
Sat Feb 21, 2015 2:57 pm
Forum: s300 / SManager
Topic: 2500 RPM Rev Limit w/ s300
Replies: 4
Views: 1945

2500 RPM Rev Limit w/ s300

First time using the s300 so I'm sorry if i missed a something stupid.... 91 CRX si - D16A6 converted to OBD1 using the Rywire Kit. 92 Civic Distributor Rebuild Motor with Vitara Pistons 75.5mm , Eagle Rod H Beams , ACL Racing Bearing ( Notched and Decked ) Car Runs a little rough at the moment duri...