Search found 19552 matches

by Spunkster
Wed Apr 21, 2021 9:45 am
Forum: s300 / SManager
Topic: MTX-D EThanol Sensor reading high!
Replies: 11
Views: 180

Re: MTX-D EThanol Sensor reading high!

I don't have an ETA at this time. This is now in the hands of the software engineers.
by Spunkster
Tue Apr 20, 2021 9:11 am
Forum: Applications
Topic: Soild CEL, NO codes
Replies: 7
Views: 115

Re: Soild CEL, NO codes

I would recommend you not use the LED.

MAP and TPS will not generate an error code just by unplugging them under some conditions..
by Spunkster
Tue Apr 20, 2021 9:02 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: 2021 Civic MT USA - Lane keep, collision mitigation broken
Replies: 1
Views: 29

Re: 2021 Civic MT USA - Lane keep, collision mitigation broken

Just drive it and the errors should go away after a few miles.

If you get errors you need to datalog and see what errors you get.
by Spunkster
Tue Apr 20, 2021 8:59 am
Forum: Traction Control with S300
Topic: A few questions before buying / install
Replies: 3
Views: 28

Re: A few questions before buying / install

You can use a different input for the traction control.

You must have both front and rear sensors for it to see a difference between front and rear.
by Spunkster
Mon Apr 19, 2021 4:08 pm
Forum: K-Pro / KManager
Topic: Issues while trying to get tuned.
Replies: 8
Views: 60

Re: Issues while trying to get tuned.

I would not try a different ECU in this vehicle until you know the wiring is correct, as you could damage the ECU.
by Spunkster
Mon Apr 19, 2021 2:48 pm
Forum: K-Pro / KManager
Topic: Issues while trying to get tuned.
Replies: 8
Views: 60

Re: Issues while trying to get tuned.

Have you corrected the wiring/ground issue?

You should try the ECU in a known working vehicle to make sure it has not been damaged.
by Spunkster
Mon Apr 19, 2021 9:31 am
Forum: K-Pro / KManager
Topic: New replacement ignition cylinder/switch?
Replies: 1
Views: 14

Re: New replacement ignition cylinder/switch?

You should be able to get the cylinder keyed to use your original keys. This has nothing to do with the immobilizer system.
by Spunkster
Mon Apr 19, 2021 9:27 am
Forum: K-Pro / KManager
Topic: Issues while trying to get tuned.
Replies: 8
Views: 60

Re: Issues while trying to get tuned.

Are you using resistor or non-resistor spark plugs?
by Spunkster
Mon Apr 19, 2021 9:25 am
Forum: s300 / SManager
Topic: MTX-D EThanol Sensor reading high!
Replies: 11
Views: 180

Re: MTX-D EThanol Sensor reading high!

You cannot use the previous version with the updated firmware.
by Spunkster
Mon Apr 19, 2021 9:22 am
Forum: s300 / SManager
Topic: SManager 2.7.6
Replies: 3
Views: 314

Re: SManager 2.7.6

Do not use older software once you have upgraded, as it will just cause more problems. Using the new version, with everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
by Spunkster
Mon Apr 19, 2021 9:20 am
Forum: TSX 2004-2014
Topic: 04 tsx flashpro not finding 07 ecu
Replies: 8
Views: 82

Re: 04 tsx flashpro not finding 07 ecu

You have not provided pictures showing what you are describing.
by Spunkster
Fri Apr 16, 2021 2:45 pm
Forum: K-Pro / KManager
Topic: Question on Lambda Sensor - Open Loop
Replies: 1
Views: 17

Re: Question on Lambda Sensor - Open Loop

You should disable closed loop if you do not have a sensor as it will generate an error and force open loop. It probably will not change the power much at all.
by Spunkster
Fri Apr 16, 2021 9:46 am
Forum: s300 / SManager
Topic: Closed Loop Malfunction
Replies: 23
Views: 4292

Re: Closed Loop Malfunction

I believe the problem is the wideband you are using, as I have been using PLX widebands in 3 cars for nearly 17 years without any issues.

We have seen many issues with AEM widebands, and they keep changing the controllers and sensors used nearly every year.
by Spunkster
Fri Apr 16, 2021 9:03 am
Forum: s300 / SManager
Topic: Closed Loop Malfunction
Replies: 23
Views: 4292

Re: Closed Loop Malfunction

What widebands are you using?