hi,
looking some knocking today on the datalog, checking the tables saw more columns like the image, what happened?
thanks for the help
Search found 35 matches
- Thu Sep 08, 2016 7:01 pm
- Forum: K-Pro / KManager
- Topic: tables more columns
- Replies: 1
- Views: 875
- Wed Jun 29, 2016 7:08 pm
- Forum: K-Pro / KManager
- Topic: Rotrex ep3 low rpm driving
- Replies: 1
- Views: 2199
Re: Rotrex ep3 low rpm driving
yeah the a/F is corrected on low tables by close loop
- Mon Mar 07, 2016 7:44 pm
- Forum: K-Pro Calibrations
- Topic: right cam angle
- Replies: 3
- Views: 2289
Re: right cam angle
thanks for the answer
i was detailing more the datalog for all the cams
17 the closer is 20
28 would be 30
and 13 to 10
24 would be 20 am i right?
i was detailing more the datalog for all the cams
17 the closer is 20
28 would be 30
and 13 to 10
24 would be 20 am i right?
- Sun Aug 10, 2014 10:48 am
- Forum: K-Pro Calibrations
- Topic: shorty header.s to long obx headers
- Replies: 1
- Views: 1885
shorty header.s to long obx headers
hi guys,
i was running shorty headers and now i installed obx long headers but i feel it with no power i have to make the log but is a lot of rain.
rbc
hondata img
2.5" exhaust
cai 3"
obx
k20a2 02
if someone can give a reason or a kal to try it would be nice
i was running shorty headers and now i installed obx long headers but i feel it with no power i have to make the log but is a lot of rain.
rbc
hondata img
2.5" exhaust
cai 3"
obx
k20a2 02
if someone can give a reason or a kal to try it would be nice
- Mon Dec 30, 2013 7:40 pm
- Forum: K-Pro Calibrations
- Topic: some Kal for my set up k20a2
- Replies: 0
- Views: 2549
some Kal for my set up k20a2
hi guys,
im looking for some kal for my k20a2 with shorty headers, 2.5" exhaust straight no cat-presilencer-high flow silencer, rbc itm, thermal gaskets tb and itm, Injen SRi.
thanks for the kals
im looking for some kal for my k20a2 with shorty headers, 2.5" exhaust straight no cat-presilencer-high flow silencer, rbc itm, thermal gaskets tb and itm, Injen SRi.
thanks for the kals
- Mon Dec 02, 2013 2:22 pm
- Forum: K-Pro / KManager
- Topic: how to run a flash pro kal in ours kpro?
- Replies: 2
- Views: 1510
Re: how to run a flash pro kal in ours kpro?
Not even copying the tables data?Spunkster wrote:This is not possible.
- Sun Nov 24, 2013 9:47 am
- Forum: K-Pro / KManager
- Topic: how to run a flash pro kal in ours kpro?
- Replies: 2
- Views: 1510
how to run a flash pro kal in ours kpro?
hi guys,
how can i run a friend flash pro kal with my kpro?
thanks for your info
how can i run a friend flash pro kal with my kpro?
thanks for your info
- Tue Oct 29, 2013 11:29 am
- Forum: K-Pro / KManager
- Topic: iacv delete, idle adjustment because goes up
- Replies: 4
- Views: 2890
Re: iacv delete, idle adjustment because goes up
And how was working before with the option disable?Spunkster wrote:Your idle problems are because you have removed the idle controller. I would highly recommend putting it back, as there is no good reason to remove it.
- Tue Oct 29, 2013 10:10 am
- Forum: K-Pro / KManager
- Topic: iacv delete, idle adjustment because goes up
- Replies: 4
- Views: 2890
Re: iacv delete, idle adjustment because goes up
I remove from the intake manifold the iacv exit if i can say it in that way,Spunkster wrote:Why have you eliminated the Idle controller?
And also filled the duct of the iacv, to improve best flow
Why?
- Tue Oct 29, 2013 7:07 am
- Forum: K-Pro / KManager
- Topic: iacv delete, idle adjustment because goes up
- Replies: 4
- Views: 2890
iacv delete, idle adjustment because goes up
hi guys, the sunday i installed the rbc itm and also the iacv plate delete, for the idle adjustment i make it with the stop screw... starts nice without problem, some minutes after when the engine warm up the idle ups to 1800 rpms aprox.... yesterday after work i check the tps and make a calibration...
- Thu Oct 17, 2013 9:51 pm
- Forum: K-Pro / KManager
- Topic: why my tps drops when the revs goes up?
- Replies: 8
- Views: 3879
Re: why my tps drops when the revs goes up?
the tps is not proportionally to rpms when they are going higher???Hondata wrote:What exactly is the problem?
Where in the datalog does it show the problem?
here stay flats the tps... and i relate the fail with this on the data log
- Thu Oct 17, 2013 8:14 pm
- Forum: K-Pro / KManager
- Topic: why my tps drops when the revs goes up?
- Replies: 8
- Views: 3879
Re: why my tps drops when the revs goes up?
at least i note on this part, am i wrong?
i hope you can advice me to correct it
i hope you can advice me to correct it
- Wed Oct 16, 2013 6:52 pm
- Forum: K-Pro / KManager
- Topic: why my tps drops when the revs goes up?
- Replies: 8
- Views: 3879
Re: why my tps drops when the revs goes up?
ok dudes here is the datalog after a work day, i already change the tps even use aftermarket bracket and nothing....
any help is well received,
thanks
any help is well received,
thanks
- Tue Oct 15, 2013 9:54 pm
- Forum: K-Pro / KManager
- Topic: why my tps drops when the revs goes up?
- Replies: 8
- Views: 3879
why my tps drops when the revs goes up?
hi there,
looking my datalogs the tps drops almost in the same rpms 2000-3000 and makes like a hole, is already calibrated to 0 min and 101 max.
can anybody give some info, thanks
regards
looking my datalogs the tps drops almost in the same rpms 2000-3000 and makes like a hole, is already calibrated to 0 min and 101 max.
can anybody give some info, thanks
regards
- Thu Aug 08, 2013 7:15 am
- Forum: K-Pro / KManager
- Topic: tps issue
- Replies: 5
- Views: 2483
Re: tps issue
in fact the values are 1.4% and 103%LK7R wrote:In KManager > Knock / TPS > Scale TPS. Check what readings will TPS give you for 0 and 100%.
Test good working TPS off another car if you can, to make sure that it is not faulty TPS.