Hondata

Hello: I was talking to a co-worker today about the upgrades I've made to my 2012 Si. He asked me numerous questions about my Si, and among them he asked whether there is a limit to the number of flashes possible to the ECU -- he has recently sold a Subaru STI and he told me that his ECU could only ...

Thank you, this is very handy info to have.

Hello, I am planning on installing the Snow Performance Stage 2 MAF Water-Methanol injection kit to my 2012 Civic Si. There are 5 wires on the MAF sensor plug. Apparently, the FlashPro Manager help files indicate the two appropriate wires for the IAT sensor, but I am unable to locate the air flow si...

Hondata wrote:In FlashPro Manager, go to the Calibration window and it is under Misc, Misc Parameters.

More detail please... Which option under Misc Parameters needs to be disabled in order to disable the immobilizer? I have attached a screenshot for your reference.

The 2012 Si ECU does not record the knock level. It should not even show up on the list of sensors, but if you've added it to the datalog templates then it will always be 0%. I am confused. Here is a screenshot of a datalog recorded [identical 2012 Si] under FlashPro Manager v1.4.5, June 10, 2013. ...

Have you guys looked into and/or resolved the fixed K.Level issue I am having? I have had this problem in FlashPro Manager versions 1.5.6 and 1.6.0. The K.Level has been fixed at 0% in all datalogs of my latest flash to the ECU. I have flashed the ECU under version 1.6.0 now about half-a-dozen times...

I downloaded version 1.6.0 and flashed my ECU this-morning. Still have a constant K.Level, this time all K.Level recordings are at 0%. Attached is the calibration under 1.6.0 and a datalog from the flash of the calibration (the knock is from an early portion of my 4 hour drive today). Is there somet...

Hondata, I flashed my ECU today (FP Manager 1.5.6) with a new calibration and am still having the same issue with K.Level being constant in my datalogs... Today, all K.Level recordings in my datalogs are at 16%. Has this issue been resolved with version 1.5.6 of FP manager? Is it a Firmware problem ...

BWelbourn: You need to upload to the ECU again with 1.5.6 Hondata, Thanks for the quick reply. I uploaded the calibration to the ECU for the second time under 1.5.6 (note: I unplugged FlashPro from the vehicle's OBDII port between the first and second ECU flash under 1.5.6) and still have K.Level &...

I just updated to FP Manager version 1.5.6 (production release: July 2, 2013) from the production release version 1.4.5. My datalogs from the first ECU flash under version 1.5.6 have K.Level recordings all at 98%. K.Level has never stayed at a constant level in my dataloging prior to version 1.5.6. ...

While you cannot import the .csv file(s) back into FlashPro Manager, you can combine (i.e., merge) .csv files together. I merge the .csv files together using statistical software (you can get some of these software packages for free online), and then analyze the combined data using the software. I u...

Thank you. FlashPro Manager seems to be working properly.

Hello, I just installed FlashPro Manager (FPM) 1.4.1.0 to my laptop. When I connect my FlashPro to my laptop, I get a message stating that the "FlashPro Firmware will be updated." I hit okay, the datalog light on my FlashPro lights up (amber color) and then my laptop displays the same firm...