Thanks! I figured that would be the answer.Spunkster wrote:Take it to your local Hondata dealer and have them read the chip out for you.
Search found 21 matches
- Thu Sep 20, 2012 9:26 am
- Forum: S300 Calibrations
- Topic: Best route to get the calibration from my S100 into S300
- Replies: 4
- Views: 2518
Re: Best route to get the calibration from my S100 into S300
- Thu Sep 20, 2012 9:22 am
- Forum: S300 Calibrations
- Topic: Best route to get the calibration from my S100 into S300
- Replies: 4
- Views: 2518
Re: Best route to get the calibration from my S100 into S300
Hondata wrote:Find whatever calibration was used to burn the chip for the S100 and open it in SManager.
I bought the car the way it sits... No info on where it was tuned even.
- Wed Sep 19, 2012 10:49 pm
- Forum: S300 Calibrations
- Topic: Best route to get the calibration from my S100 into S300
- Replies: 4
- Views: 2518
Best route to get the calibration from my S100 into S300
Best route to get the calibration from my S100(p28) into S300(p72j) - As title says!
Send in ECU with the S100 (p28)?
Thanks ahead of time.
Send in ECU with the S100 (p28)?
Thanks ahead of time.
- Tue Sep 11, 2012 7:33 am
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Pure-Tuning sorted me out, removed the J4 resistor and it works flawlessly.
Got my MoTeC PLM wired in and reading as well.
Picked up a HONDATA 4 BAR MAP sensor while I was there...
Once again thanks for the input HONDATA guys!
Got my MoTeC PLM wired in and reading as well.
Picked up a HONDATA 4 BAR MAP sensor while I was there...
Once again thanks for the input HONDATA guys!
- Wed Sep 05, 2012 9:12 am
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Never mind....
Taking it to Pure-Tuning to finish having the prep work done that was overlooked.
Thanks for all the input everyone!
Taking it to Pure-Tuning to finish having the prep work done that was overlooked.
Thanks for all the input everyone!
- Tue Sep 04, 2012 6:20 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
What is the best way to get an RMA to get this repaired? I suppose its a $100 to do this correct as a minimum? Thanks again for the help!
- Tue Sep 04, 2012 3:56 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Understood.
Original supplier is going to take care of it I hope.
Thanks for your help and info.
Original supplier is going to take care of it I hope.
Thanks for your help and info.
- Tue Sep 04, 2012 2:27 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Took a photo with a proper camera... hope this is clear now.
- Tue Sep 04, 2012 1:28 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Is there someone I could talk to on the phone? If the component with the {000} on it is what I am supposed to remove, I am totally not comfortable with that, looks like a surface mount resistor. '7. Remove J4 (surface mount 0 ohm resistor) and transfer to J1 (located on the back of the circuit board...
- Tue Sep 04, 2012 1:21 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
So yeah... not sure what to cut here... From what I cant tell there is no J4 jumper...
- Tue Sep 04, 2012 1:08 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
I assumed it was due to the long weekend :)
Any documentation where J4 is or just hunt for it? :)
Any documentation where J4 is or just hunt for it? :)
- Tue Sep 04, 2012 12:02 pm
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Same sounding problem as me...
you say to cut J4!!!! not j12!!!
http://www.hondata.com/forum/viewtopic.php?t=5022
you say to cut J4!!!! not j12!!!
http://www.hondata.com/forum/viewtopic.php?t=5022
- Tue Sep 04, 2012 11:47 am
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Sorry for confusion... I know it says to Cut J12 under this section in the S300 ECU section... 'Take the ECU circuit board out the ECU case. De-solder IC4, install and solder in the 20 pin 74373 latch. De-solder J1, install and solder the supplied jumper. De-solder R54, install and solder the suppli...
- Tue Sep 04, 2012 10:31 am
- Forum: s300 / SManager
- Topic: Spark plugs
- Replies: 92
- Views: 156011
Re: Spark plugs
Spunkster wrote:Hondata wrote:You need to use resistor spark plugs. See http://www.hondata.com/techksparkplugs.html
Appropriate NGK part numbers:
BKR8EIX #8 Stock# 2668
BKR9EIX #9 Stock# 2669
R6601-10 #10 Stock# 4017
Understood... multiple sets of RESISTOR plugs on order :)
- Tue Sep 04, 2012 10:23 am
- Forum: s300 / SManager
- Topic: S300 uploads fine, can't view any sensors - all frozen
- Replies: 17
- Views: 6241
Re: S300 uploads fine, can't view any sensors - all frozen
Ordered a set of the BKR7E's and also a set of BKR8EIX's also to try out. Both resistor plugs as requested by Hondata. I have a P72J with a s300J... Is it J4 I am supposed to cut? Wouldn't this be part of the install when the ECU was shipped out (done by MASE engineering)? Also I can not find any do...