Search found 146 matches

by Lyle_57IAL
Sun Nov 01, 2020 7:58 pm
Forum: S300 Calibrations
Topic: S300 with Flex fuel / Ethanol Content sensor
Replies: 2
Views: 4050

S300 with Flex fuel / Ethanol Content sensor

Good Morning Hondata,

What are the makes / models of ethanol content sensors that are compatible with the S300. Weather these are on the digital channel or a standard 0 - 5 v channel

TIA
by Lyle_57IAL
Fri Oct 09, 2020 4:57 pm
Forum: s300 / SManager
Topic: Hondata S300 - Setting up wideband closed loop
Replies: 2
Views: 3978

Hondata S300 - Setting up wideband closed loop

Good Morning Hondata, had a few questions about setting up Wideband closed loop on smanager. Currently the setup is B18C turbo, Bosch 1300cc injectors, OEM fuel pressure and AEM wideband with the 4.9 sensor. At this stage just want to use closed loop to stabilize mixtures at idle and light load. Car...
by Lyle_57IAL
Tue Aug 18, 2020 5:35 pm
Forum: K-Pro / KManager
Topic: Kpro - Analogue input Pins
Replies: 1
Views: 3380

Kpro - Analogue input Pins

Good Morning Hondata, Was wondering if there were any pins available on the factory loomb / plugs to use for a analogue input. Like the S300 / Smanager, OEM pins can be reused to take an analogue signal. ie - D10, D12, D14, B6 . Are there Original pins that can be used in the Kpro in the same way ? ...
by Lyle_57IAL
Wed Aug 12, 2020 5:14 pm
Forum: K-Pro / KManager
Topic: K24a3 - with Kpro
Replies: 1
Views: 3532

K24a3 - with Kpro

Good Morning hondata, Currently running a K24a3, Rotrex S/C, 750cc injectors, RBC inlet manifold and 70mm throttlebody. OEM engine internals - all in a EG civic When selecting a base map to begin a tune from i have noticed that some base maps provided have a different levels of features added, which...
by Lyle_57IAL
Sat Aug 08, 2020 2:40 am
Forum: K-Pro / KManager
Topic: K24a3 - offset ignition timing offset at idle
Replies: 6
Views: 5761

Re: K24a3 - offset ignition timing offset at idle

Really ? Specifying 20 degrees and having -1 delivered ?
by Lyle_57IAL
Fri Aug 07, 2020 3:39 pm
Forum: K-Pro / KManager
Topic: K24a3 - offset ignition timing offset at idle
Replies: 6
Views: 5761

Re: K24a3 - offset ignition timing offset at idle

Yes but whats in the ignition table... does not match what ignition timing is being delivered.
by Lyle_57IAL
Fri Aug 07, 2020 5:49 am
Forum: K-Pro / KManager
Topic: K24a3 - offset ignition timing offset at idle
Replies: 6
Views: 5761

Re: K24a3 - offset ignition timing offset at idle

Apologies guys here is the datalog
by Lyle_57IAL
Fri Aug 07, 2020 1:49 am
Forum: K-Pro / KManager
Topic: K24a3 - offset ignition timing offset at idle
Replies: 6
Views: 5761

K24a3 - offset ignition timing offset at idle

Good Evening Hondata, Currently i have a OEM standard K24a3 utilising a Kpro, with bosch 750cc injectors (deadtimes set), 50psi base fuel pressure, walboro 450 fuel pump. Have a strange issue at idle where the ignition tables are specifying 20 degrees... however the ignition timing delivered (throug...
by Lyle_57IAL
Thu Jul 23, 2020 6:20 pm
Forum: s300 / SManager
Topic: S300 Fan C - radiator override
Replies: 3
Views: 4314

Re: S300 Fan C - radiator override

Yes I am aware of this option, however would prefer not to go down that path due to the extra complexity.

Do you know (or can Hondata supply) a current rating for the Fan C internal dry contact ?
by Lyle_57IAL
Thu Jul 23, 2020 9:02 am
Forum: s300 / SManager
Topic: S300 Fan C - radiator override
Replies: 3
Views: 4314

S300 Fan C - radiator override

Hi guys,

Currently have three relays switching 3 auxiliary fans. Will there be any problem switching these all three relays by “commoning” up the native on the relay coil and switching / triggering by the FanC Hondata function ?

Cheers :)
by Lyle_57IAL
Sun Jul 19, 2020 5:03 am
Forum: s300 / SManager
Topic: Open Loop - IAT compensation table
Replies: 3
Views: 4480

Re: Open Loop - IAT compensation table

Why, there are other parts of the software that are designed in such a way
by Lyle_57IAL
Wed Jul 15, 2020 9:30 pm
Forum: s300 / SManager
Topic: SManager software requests
Replies: 336
Views: 1380194

Re: SManager software requests

Hi guys, Would like to request some further detail on the IAT Compensation. Currently the compensation is only base on Intake Air Temperature, however this is problematic with idle when restarting the car with heat soak. If this table was 2 dimensional (X-Axis Temperature) ( Y-Axis Throttle position...
by Lyle_57IAL
Wed Jul 15, 2020 9:27 pm
Forum: s300 / SManager
Topic: Open Loop - IAT compensation table
Replies: 3
Views: 4480

Open Loop - IAT compensation table

Hi guys, Would like to request some further detail on the IAT Compensation. Currently the compensation is only base on Intake Air Temperature, however this is problematic with idle when restarting the car with heat soak. If this table was 2 dimensional (X-Axis Temperature) ( Y-Axis Throttle position...
by Lyle_57IAL
Thu Mar 12, 2020 4:59 pm
Forum: s300 / SManager
Topic: data logging S300 - export to Csv
Replies: 3
Views: 2806

Re: data logging S300 - export to Csv

Yep i have noticed it is in Bar-Absolute. Is there any way to change this to PSI or Bar-Gauge ?
by Lyle_57IAL
Thu Mar 12, 2020 4:33 am
Forum: s300 / SManager
Topic: data logging S300 - export to Csv
Replies: 3
Views: 2806

data logging S300 - export to Csv

Hi guys,

When exporting a data log to a Csv file the Map value is not the same value as the value on the Hondata trace

For example. I am running 6psi of boost, but the MAP value on the csv file will show 1.43 Aprox

What exactly is going on here ?