Search found 8 matches

by REDEF91
Thu Feb 09, 2012 7:33 pm
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

Re: 2000 civic si

Thank you
by REDEF91
Thu Feb 09, 2012 8:40 am
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

Re: 2000 civic si

Sorry hondata just really need some suggestions
by REDEF91
Wed Feb 08, 2012 9:05 pm
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

Re: 2000 civic si

Any suggestions on what to set the overrun fuel cut off for the tps? Sorry again
by REDEF91
Wed Feb 08, 2012 9:01 pm
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

Re: 2000 civic si

Srry finally got my tps range reading closed throttle it was -3.14 and at open throttle it was 98.9 does that sounds normal? Sorry just want to get it running decent to get it over too the tuner
by REDEF91
Wed Feb 08, 2012 7:47 am
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

Re: 2000 civic si

I believe i found the problem, i havent had time to bring the car too my tuner and i have the stock Itr map running 370cc injector i believe that must be the problem consider the flow rate is different from the stock 240cc. Does that sound correct too all the tuners out there?
by REDEF91
Tue Feb 07, 2012 4:17 pm
Forum: S300 Calibrations
Topic: b16 with pct pistons and ctr intake cam and itr exh. cam
Replies: 0
Views: 1201

b16 with pct pistons and ctr intake cam and itr exh. cam

anyone have a map for this set up till i go dyno tune my car please, b16 with pct pistons and ITR head and ctr intake cam and itr exh. cam
by REDEF91
Tue Feb 07, 2012 4:09 pm
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

Re: 2000 civic si

update on my s300 i checked tps % and with the car just on the on position it climbs to 100 % perfect ,but with car running it will only start to climb at about 2800 rpm on the tps % value
by REDEF91
Tue Feb 07, 2012 3:51 pm
Forum: S300 Calibrations
Topic: 2000 civic si
Replies: 9
Views: 3336

2000 civic si

hondata Gods maybe you guys can help me with something that is driving me crzy, i currently purchased a skunk2 66mm alpha series TB. I followed the procedures on how too install it and measure the volts of the tps off the car as i seen the video on skunk2 website. i matched it as close as i could fr...