Hondata

Got a customer with a brand new s300 v2 and cant install driver/ecu to the laptop. Wont register or anything. Got a red light on the ecu.

I can make you a full tune. pm me for more info.

use a p28 base map

you gotta get tuned

you need to fix your speed sensor. and you running lean at wot. part throttle looks ok.

You should be around 10.6:1 with this setup. Use a jdm B16 base map. 50 psi of fuel pressure with factory injectors. It should run and get it to a tuner. then swap the injectors and tune it.

B16 crank and b16 rods with type r 11.1:1 pistons right. Whats the gasket thikness

That what they say.

If you put some springs and retainers with skunk2 pro 3 cams you should get around 240-245

hello. is there anything wrong with the 2.2.7

Last log is blank. Didnt record.

FAL is a very good fan it bolts to a civic radiator and it comes with a shroud. Go to Summit racing or Jegs you get a better price there.

I'll check your log tomorrow, im going to bed now.

Use RC 440cc. No you around 12.3:1-12.5:1.

When ecu is in open loop it will run of the map you make. When in closed loop it runs of oxygen sensor or you can get a wideband aem A/F gauge and wire to it. E85 your motor will need about 27% more fuel than 93. So you will need a good pump maybe bosch 44 inline, 6an fuel line bigger injectors atle...